
( Brand: Vevor ), ( Manufacturer Part Number: GFGFD002 ), ( Part Type: Station ), ( Features: 1600w ), ( Rated Voltage And Frequency: Ac 220v-230v/110v 60/50hz ), ( Preheating Plate Power: 1500w ), ( Preheating Plate Size: 280u00d7270mm ), ( Preheating Plate Temperature: 0 450cccccc ), ( UPC: 871248155629 )
Adjustment method: press power-on, display: c. Choose or 1, every the status change one time, is paid percentage adjustment, 1 switching control. This machine has 600w heating system, widely to 280x270mm turn on the power switch.
How to use: please download the manual here see use this machine.
Operation instruction: inspect the machine and then open it: check connection of power line. Keep the ventilation free-flowing, infrared preheating plate clean, use dehydrated alcohol clean it regularly.
Allow the t-8280 power-on-self-test post to complete.
T-8280 can achieve to heat pcb board and component which contains lead or not, especially for the bag AMD parts. Finishing, press off, the preheating plate stops working.
Don't shift the small components on pcb board, ensure welding quality. This item has 600w heating system, widely to 280x270mm.
Machine installation and adjustment: the preheating plate heating type includes: total pressure flow-through way paid percentage adjustment.
If you don't use the machine for a long time, you'd better pull off power source plug. Q: when will the item be shipped out. The high temperature operation, pay attention, avoid scalding. Attention: don't close the power switch until machine full cooling.
Easily operate, you can operate it through easy training.
1 ship from ranch Cognac, ca, and only to address. Feature this machine selects the infrared component to give off heat which independent exploration, adopts advanced paid intelligent temperature, controls temperature precisely.
Q: where do you ship from. A: the item ships from ranch Cognac, ca, USA. Use infrared heat, easy to cut through, heat proportion, don't have sirocco flow. It can achieve to heat pcb board and component which contains lead or not, especially for the bag AMD parts. You can also set the preheating temperature according to users experience and technology.
Press the button on, infrared preheating plate starts to work, off it stops working.
You can adjust it according to the preheating allowance. Press OK cautions: after finishing, don't turn off the power immediately make sure infrared preheating plate complete cooling.
After this, temperature set-points will display last value used.
The preheating temperature set: if pcb board contains lead, adjust infrared plate to not, it is easy operate, you can operate through training. Specifications work bench size: 16.