
( Brand: Vevor Radiator Caps ), ( Manufacturer Part Number: GIREW002 ), ( Part Type: Heat Station ), ( Complete Machine Power: 1600w ), ( Preheating Plate Power: 1500w ), ( Preheating Plate Size: 11x10.63 Inch / 280x270 Mm ), ( Preheating Plate Temperature: 32dddddd 842dddddd ), ( Work Bench Size: 16.14x12.44 Inch / 410x316 Mm ), ( UPC: 827843764315 )
It is easy to operate, you can operate through training. Allow the t-8280 power-on-self-test post to complete.
Q: where do you ship from. Don't shift the small components on PCB board, ensure welding quality. After this, temperature set-points will display last value used.
How to use: please download the manual here see use this machine. Adjustment method: press power-on, display: c. Choose or 1, every the status change one time, is paid percentage adjustment, 1 switching control.
Easily operate, you can operate it through easy training.
According to the size of PCB board and welding technological requirement, press blue button up red down, regulate output temperature preheating plate between if you don't use machine for a long time, you'd better pull off power source plug. Operation of preheating PCB board: the placement and adjustment according to size board, adjust board holder, then put fix knob. Feature this machine selects the infrared component to give off heat which independent exploration, adopts advanced paid intelligent temperature, controls temperature precisely.
This machine has 600w heating system, widely to 280x270mm. Attention: don't close the power switch until machine full cooling.
Press OK cautions: after finishing, don't turn off the power immediately make sure infrared preheating plate complete cooling.
Finishing, press off, the preheating plate stops working.
T-8280 can achieve to heat PCB board and component which contains lead or not, especially for the bag AMD parts.
You can also set the preheating temperature according to users experience and technology. Machine installation and adjustment: the preheating plate heating type includes: total pressure flow-through way paid percentage adjustment.
Q: when will the item be shipped out. It can achieve to heat PCB board and component which contains lead or not, especially for the bag AMD parts turn on power switch.
Press the button on, infrared preheating plate starts to work, off it stops working.
1 ship from ranch Cognac, ca, and only to address.
The black switch on front panel are used to control infrared preheating plate press blue button up, red down can adjust temperature between and use heat, easy cut through, heat proportion, don't have sirocco flow. The high temperature operation, pay attention, avoid scalding.
Operation instruction: inspect the machine and then open it: check connection of power line. You can adjust it according to the preheating allowance.
Keep the ventilation free-flowing, infrared preheating plate clean, use dehydrated alcohol clean it regularly.
Preheating open and close: press the on button, plate about 3-5 minutes, make temperature be setting value then carry next step. This item has 600w heating system, widely to 280x270mm.